Connect EtherNet/IP to Modbus RTU Slave

Connects up to 32 EtherNet/IP Adapters with as many as 32 Modbus RTU Slave devices

SKU: 460ECMM

460ECMM

$NZD 1,336.30 - $NZD 1,901.55

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Connect EtherNet/IP Adapter Devices to Modbus RTU Slaves

The 460ECMM moves Registers and Coils between Modbus RTU Slave devices and an EtherNet/IP network of Adapter devices. It’s the perfect tool to tie all of your EtherNet/IP devices into your Modbus RTU network. Easily interface existing device netoworks without having to add a controller.

How Do I Use 460ECMM-N34 in My Application?

For most applications the mapping is very straight forward. Modbus Register and Coil data is mapped to up 496 bytes of EtherNet/IP data per Adapter. EtherNet/IP IO data is mapped directly to your Modbus RTU Slave registers and coils. It really is that simple

Why Use Real Time Automation as a Gateway Supplier?

While there are certainly other companies offering protocol gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24-hour wait.

Try the RTA difference today.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Ethernet/IP Scanner Features

Operation Modes: Class 1 I/O Scanner (minimal Adapter is required and supported)
Message Support: Implicit Class 1 Cyclic I/O, Explicit not supported
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Adapter Devices: 32
Max Data Per Adapter Connection: Up to 496 bytes in each direction

Modbus RTU Master Features

Modbus Operation Modes: Modbus RTU Master
Function Codes Supported: 1, 2, 3, 4, 5, 6, 15 & 16
Swapping: Byte and Word Swapping
Maximum Modbus RTU Slave Devices: 32
Number Read/Write Scan Lines per RTU Slave Device: 200 Total - 100 reads & 100 writes
Scan Line Support: Up to 125 Registers or 512 Coils

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460ECMM-N2E
DATASHEET  USERGUIDE
460ECMM-N2EW
DATASHEET  USERGUIDE
460ECMM-N34
DATASHEET  USERGUIDE
460ECMM-N700
DATASHEET  USERGUIDE
460ECMM-NNA1
DATASHEET  USERGUIDE
460ECMM-NNA4
DATASHEET  USERGUIDE