Connect an EtherNet/IP Scanner to a Profinet IO Controller

Easily connect an EtherNet/IP Scanner to a Profinet IO Controller

SKU: 460ESPS

460ESPS

$NZD 1,337.49 - $NZD 1,903.24

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Connect an EtherNet/IP Scanner to a Profinet IO Controller

The 460ESPS moves data between an EtherNet/IP scanner and a PROFINET IO controller. It’s the perfect tool to bridge the gap between Siemen controllers and Allen-Bradley PLCs.

How Do You Map the Data?

EtherNet/IP IO data will be mapped into 10 Profinet IO slots. Each slot will be assigned a type of Int8, int16, int32, int64, Uint8, Uint16, Uint32, Uint64, float, double, binary8, binary16, binary32 or Short String. The slot can consist of up to 480 bytes of data from your Ethernet/IP Scanner device.

When writing from your Profinet IO Controller to your EtherNet/IP Scanner, there will be up to 10 slots each defined by the same types. Data in those slots can be mapped to your EtherNet/IP device.

It’s really that simple! Need to modify your data as it passes from one protocol to the other? No problem. Each data mapping you apply can be modified with up to 3 mathematic functions. Add 4 to a value, multiply by 4 and divide by 10 with ease.

Why Use Real Time Automation as a Gateway Supplier?

The 460ESPS provides an option to move data between an EtherNet/IP scanner and a PROFINET controller. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because that means you mean a lot more to us.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Ethernet/IP Adapter Features

Operation Modes: EtherNet/IP Adapter
Message Support: Implicit, Explicit UCMM
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Scanner Devices: Up to 10 can listen, only one can write I/O
Max Data Per Adapter Connection: Up to 480 bytes in each direction

Profinet IO Server Features

Maximum Number of Slots: 10 Slots in, 10 Slots out
Slot Size: 8, 16, 32, 64 or 128 Bytes
Each Slot Can be Defined for a Single Data Type of: Int8, int16, int32, int64, UInt8, Uint16, Uint32, Uint64, float, double, binary8, binary16 or binary32
Total Data Supported: 1280 Bytes
Maximum Profinet IO Controller Connections: 1

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460ESPS-N2E
DATASHEET  USERGUIDE
460ESPS-N2EW
DATASHEET  USERGUIDE
460ESPS-N34
DATASHEET  USERGUIDE
460ESPS-NNA1
DATASHEET  USERGUIDE