Connect EtherNet/IP Adapters to BACnet/IP

Easily Connect EtherNet/IP Adapters to BACnet/IP

SKU: 460ECBS

460ECBS

$NZD 1,346.75 - $NZD 1,916.42

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Connect EtherNet/IP Adapter Devices to a BACnet/IP Client
The 460ECBS moves data between a BACnet/IP Client device and an EtherNet/IP network of up to 32 Adapter devices. It’s the perfect tool to tie all of your EtherNet/IP devices into your BACnet/IP Building Automation System.

How Do I Use the 460ECBS in My Application?
Up to 496 bytes of data from your EtherNet/IP Adapters will be mapped into your BACnet/IP Client as BACnet/IP data. When writing from your BACnet/IP Client to your EtherNet/IP Adapters up to 496 bytes of BACnet/IP data will be mapped to up to 32 EtherNet/IP Adapters as EtherNet/IP data.

It’s really that simple. Need to modify your data as it passes from one protocol to the other? No problem. Each data mapping you apply can be modified with up to 3 mathematic functions. Add 4 to a value, multiply by 4 and divide by 10 with ease.

Why Use Real Time Automation as a Gateway Supplier?
The 460ECBS provides an option to connect EtherNet/IP Adapter devices to your BACnet/IP Building Automation System. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because that means you mean a lot more to us.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Ethernet/IP Scanner Features

Operation Modes: Class 1 I/O Scanner (minimal Adapter is required and supported)
Message Support: Implicit Class 1 Cyclic I/O, Explicit not supported
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Adapter Devices: 32
Max Data Per Adapter Connection: Up to 496 bytes in each direction

BACnet/IP Server Features

BACnet/IP Operation Modes: BACnet/IP Server
Supported Object Types: Device, Binary I/O, Analog I/O, Character String Value
Supported Service Codes: Read & Read Multiple-B, Write & Write Multiple-B, COV & COV unsolicited-B, Device Dynamic Binding, Dynamic Object Binding-B, Device Communication Control-B
Maximum Connections: 1
Analog Objects Supported: 1200 Input and 1200 Output
Binary Objects Supported: 1600 Input and 1600 Output

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460ECBS-N2E
DATASHEET  USERGUIDE
460ECBS-N2EW
DATASHEET  USERGUIDE
460ECBS-N34
DATASHEET  USERGUIDE
460ECBS-NNA1
DATASHEET  USERGUIDE