Connect EtherNet/IP to USB

Connects up to 32 EtherNet/IP Adapters with up to 2 USB devices

SKU: 460ECUSB

460ECUSB

$NZD 1,422.95 - $NZD 1,475.54

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Get Your USB Barcode Scanners Connected Directly to Your EtherNet/IP Adapter Devices

The 460ECUSB moves data between up to 2 USB devices like barcode scanners and up to 32 EtherNet/IP Adapter devices. It’s the perfect tool to tie your USB devices to your EtherNet/IP Adapters. Perfect for printers and barcode scanners.

How Do I Use 460ECUSB in My Application?

Incoming ASCII data from a USB device is mapped directly to your EtherNet/IP Adapter devices. You set how often the gateway updates the data to the Adapters. This update is cyclic, not event based. For event based processing, like most barcode scans, you can map an additional counter that increments whenever a successful message is received from the USB device.

If your device uses delimiters, the 460ECUSB can be configured to automatically remove the delimiters, no need to deal with the delimiters in your Adapters. If you need to parse your data, the 460ECUSB can parse a string of ASCII data in up to 50 segments by delimiter or offset.

Why Use Real Time Automation as a Gateway Supplier?

While there are certainly other companies offering protocol gateways, there is no one who provides the level of support and service that you receive from RTA. When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24-hour wait. Try the RTA difference today.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Ethernet/IP Scanner Features

Operation Modes: Class 1 I/O Scanner (minimal Adapter is required and supported)
Message Support: Implicit Class 1 Cyclic I/O, Explicit not supported
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Adapter Devices: 32
Max Data Per Adapter Connection: Up to 496 bytes in each direction

USB ASCII Features

Operation Modes: Device to PLC only
Maximum Number of Devices Supported: 2
ASCII Device Interfaces: USB
Maximum Number of ASCII Characters Transferred: 1024
Delimiter Processing: Incoming delimiters automatically removed
Parsing: Parse string of ASCII data in up to 20 segments by delimiter or offset

Gateway Security
You can configure up to 9 different users access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.