Connect EtherNet/IP to Low Level Allen-Bradley PLC

Connects an EtherNet/IP Scanner with as many as 5 Allen Bradley PLCs

SKU: 460ESETC

460ESETC

$NZD 1,346.75 - $NZD 1,916.42

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Get Your EtherNet/IP Scanner Connected Directly to the Data Table of Your Legacy Allen-Bradley PLC
The 460ESETC moves data between an EtherNet/IP Scanner device and up to 5 Allen-Bradley PLCs.

Have a Legacy Allen-Bradley PLC that doesn’t support EtherNet/IP? Move data from your EtherNet/IP Scanner device to low level legacy Allen-Bradley PLCs like the MicroLogix, SLC 505, and PLC 5E.

How Does it Work?
You allocate two areas of register blocks in your Allen-Bradley PLC. One area is a user defined set of write only registers accepting data from your EtherNet/IP device. The other area is full of read only register blocks to send data to your EtherNet/IP device. You directly map EtherNet/IP data into read and write locations in the data table of your Allen-Bradley PLC.

It’s really that simple.

Why use Real Time Automation as a Gateway Supplier?
While there are certainly other companies offering protocol gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and that doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because, that means, you mean more to us.

Coming soon on our new dual Ethernet hardware, click for more information!

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Ethernet/IP Adapter Features

Operation Modes: EtherNet/IP Adapter
Message Support: Implicit, Explicit UCMM
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Scanner Devices: Up to 10 can listen, only one can write I/O
Max Data Per Adapter Connection: Up to 480 bytes in each direction

EtherNet/IP Tag Client Features

PLC Support: ControlLogix, CompactLogix, FlexLogix, MicroLogix, SLC’s and PLC5E’s
Maximum Number of PLCs Supported: 5
Maximum Number Read Tags or Registers Supported: 150 per PLC
Maximum Number Write Tags or Registers Supported: 150 per PLC
Array Support: Yes, for all data types except strings
Supported Data Types: ControlLogix / CompactLogix / FlexLogix: Bit, 32 Bit Array, SINT, INT, REAL, STRING, DINT, MicroLogix / SLC / PLC5E: 16 Bit Array, INT, REAL, STRING

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460ESETC-N2E
DATASHEET  USERGUIDE
460ESETC-N2EW
DATASHEET  USERGUIDE
460ESETC-N34
DATASHEET  USERGUIDE
460ESETC-NNA1
DATASHEET  USERGUIDE