Modbus TCP/IP Data Manipulation

Manipulate Modbus TCP/IP Data Between Client and Server Devices

SKU: 460MCMS

460MCMS

$NZD 1,346.75 - $NZD 1,916.42

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Manipulate Modbus TCP/IP Server Data Moving to a Modbus TCP/IP Client
The 460MCMS moves data between up to 32 Modbus TCP/IP Server devices and a Modbus TCP/IP Client.

With the 460MCMS Register and Coil data can freely move between any devices connected to the gateway.

Why Do a I need a gateway to connect Modbus TCP/IP Servers to a Client?
99% of the time the answer is you don’t. Modbus TCP/IP Clients are designed to talk with multiple Server devices. The 460MCMS is designed for those 1% of times when you have to manipulate your data, slow down the flow of data or allow a Client to handle more Servers than it supports.

Need to scale your data or manipulate it with other math functions? Do you have a Client overwhelming the processor of your server device? Do you have too many devices connected your Client? The 460MCMS allows you to add scaling to any data, apply simple math operations, add alarming and control the request speeds of your server devices. It can also concatenate multiple server devices into 1 device allowing your Client to communicate with more devices.

Why Use Real Time Automation as a Gateway Supplier?
The 460MCMS provides an option to manage Modbus TCP/IP device data and pass it to a Modbus TCP/IP Client. While there are certainly a number of other companies offering solutions like ours, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and that doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because, that means, you mean more to us.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Modbus TCP/IP Server Features

Modbus Operation Modes: Modbus TCP/IP Server
Function Codes Supported: 1, 2, 3, 4, 5, 6, 7, 15 & 16
Swapping: Byte and Word Swapping
Maximum Modbus TCP/IP Client Connections: 10
Contiguous Data Areas: 200 Total - 100 reads & 100 writes
Data Area Limits: 500 Contiguous Coils or 500 Contiguous Registers

Modbus TCP/IP Client Features

Modbus Operation Modes: Modbus TCP/IP Client
Function Codes Supported: 1, 2, 3, 4, 5, 6, 15 and 16
Swapping: Byte and Word Swapping
Maximum Modbus TCP/IP Server Devices: 32
Number Read/Write Scan Lines per Server Device: 200 Total - 100 reads & 100 writes
Scan Line Support: Up to 125 Registers or 512 Coils

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460MCMS-N2E
DATASHEET  USERGUIDE
460MCMS-N2EW
DATASHEET  USERGUIDE
460MCMS-N34
DATASHEET  USERGUIDE
460MCMS-NNA1
DATASHEET  USERGUIDE