Get EtherNet/IP Adapter devices into a DeviceNet PLC

The perfect tool to connect EtherNet/IP devices to legacy DeviceNet PLC’s



$NZD 1,304.25 - $NZD 1,325.16


Please note, site orders are made via credit card. Please contact if you require support to purchase directly.

Product Description

The Smart Way To Move EtherNet/IP Device Data to a DeviceNet Controller
The 460ECDS is the perfect tool to connect up to 32 EtherNet/IP adapter devices to a DeviceNet PLC. Get the all the latest EtherNet/IP enabled devices to work with your Legacy DeviceNet PLC’s.

How Does the 460ECDS Work?
Up to 240 bytes of data can be mapped to and from DeviceNet to up to 32 different EtherNet/IP devices. The data mapping from DeviceNet to EtherNet/IP is transparent. Data from one protocol will be represent in the same fashion on the other protocol

It’s really that simple. Need to modify your data as it passes from one protocol to the other? No problem. Each data mapping you apply can be modified with up to 3 mathematic functions. Add 4 to a value, multiply by 4 and divide by 10 with ease. 

Configure Your Data Transfer from a Web Page
All the data transfer is configurable using the embedded web server. This is the quickest, easiest way of exchanging data between a DeviceNet Master and EtherNet/IP Adapters. You define the I/O data that gets transferred and you pick where it should end up in the DeviceNet Master. There is no software to download or code to futz with. It sounds simple, and it is– that’s the point!

Why Use Real Time Automation as a Gateway Supplier?
The 460ECDS provides an option to connect EtherNet/IP Adapter devices to your DeviceNet network. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because that means you mean a lot more to us.

Try the RTA difference today and give us a call at 1-800-249-1612 or check out more information on us and our other solutions at

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

DeviceNet Slave Features

DeviceNet Operation Modes: DeviceNet Slave
Supported Data Types: Int8, int16, int32, int64, uint8, uint16, uint32, uint61, float, double float, binary8, binary16, binary32
Maximum Connections: 1
Maximum Input Size: 240 Bytes in up to 15 Data Groups
Maximum Output Size: 240 Bytes in up to 15 Data Groups

Ethernet/IP Scanner Features

Operation Modes: Class 1 I/O Scanner (minimal Adapter is required and supported)
Message Support: Implicit Class 1 Cyclic I/O, Explicit not supported
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Adapter Devices: 32
Max Data Per Adapter Connection: Up to 496 bytes in each direction

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.