Connect EtherNet/IP Data Manipulation

Connects up to 32 EtherNet/IP Adapters with an EthernNet/IP Scanner



$NZD 1,204.75 - $NZD 1,315.30


Please note, site orders are made via credit card. Please contact if you require support to purchase directly.

Product Description

Manipulate EtherNet/IP Adapter Data Moving to an EtherNet/IP Scanner
The 460ECES moves data between up to 32 EtherNet/IP Adapter devices and an EtherNet/IP Scanner. With the 460ECES EtherNet/IP data can freely move between any devices connected to the gateway. A pefect tool to make replacement EtherNet/IP devices match the existing data parsing in the PLC.

How Do I Use the 460ECES-N34 in My Application?
Why do a I need a gateway to connect EtherNet/IP Adapters to a Scanner? 99% of the time the answer is you don’t. The 460ECES is designed for those 1% of times when you have to manipulate your data, slow down the flow of data or allow a Scanner to handle more Adapters than it supports.

Need to scale your data or manipulate it with other math functions? Do you have a Scanner overwhelming the processor of your Adapter device? Do you have too many devices connected to your Scanner? The 460ECES allows you to add scaling to any data, apply simple math operations, add alarming and control the request speeds of your Adapter devices. It can also concatenate multiple Adapter devices into 1 device allowing your Scanner to communicate with more devices.

Why Use Real Time Automation as a Gateway Supplier?
While there are certainly other companies offering protocol gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24-hour wait.

Try the RTA difference today.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Ethernet/IP Scanner Features

Operation Modes: Class 1 I/O Scanner (minimal Adapter is required and supported)
Message Support: Implicit Class 1 Cyclic I/O, Explicit not supported
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Adapter Devices: 32
Max Data Per Adapter Connection: Up to 496 bytes in each direction

Ethernet/IP Adapter Features

Operation Modes: EtherNet/IP Adapter
Message Support: Implicit, Explicit UCMM
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Scanner Devices: Up to 10 can listen, only one can write I/O
Max Data Per Adapter Connection: Up to 480 bytes in each direction

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.