Connect Your DF1 Serial PLCs to your EtherNet/IP Based Allen-Bradley PLCs

Easily connect data from your legacy PLC to Logix Processors

SKU: 460ETCDFM

460ETCDFM

$NZD 1,385.47 - $NZD 2,088.93

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Easily Connect Data Tables In Your Legacy PLC To Tags In Logix Processors
There is no easier way to transfer data between any of your Ethernet based Allen-Bradly PLCs, and your legacy serial Allen-Bradley PLCs! Any of your old, serial PLCs like the PLC5, SLC, or MicroLogix can now provide inputs to a Logix processor and get outputs from a Logix processor.

It’s the perfect tool to keep those old legacy PLCs from the scrap pile and extend their useful life.

How Do I Use the 460ETCDFM in My Application?
For most applications the mapping is very straight forward. PLC file locations (like N7:200 and F9:1) are mapped directly to Tags in your Logix processor.

No message instructions and no ladder is need to transfer the data. The gateway pushes and pulls the data from defined file and tag blocks.

It really is that simple.

Why Use Real Time Automation as a Gateway Supplier?
While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because that means you mean a lot more to us.

Try the RTA difference today.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

EtherNet/IP Tag Client Features

PLC Support: ControlLogix, CompactLogix, FlexLogix, MicroLogix, SLC’s and PLC5E’s
Maximum Number of PLCs Supported: 5
Maximum Number Read Tags or Registers Supported: 150 per PLC
Maximum Number Write Tags or Registers Supported: 150 per PLC
Array Support: Yes, for all data types except strings
Supported Data Types: ControlLogix / CompactLogix / FlexLogix: Bit, 32 Bit Array, SINT, INT, REAL, STRING, DINT, MicroLogix / SLC / PLC5E: 16 Bit Array, INT, REAL, STRING

DF1 Master Features

Operation Modes: DFM Full Duplex and DFM Half Duplex
PLCs Supported: MicroLogix 1000, SLC 5/03 5/04 5/05, most PLC5s
Maximum number of Devices supported: 1 in Full Duplex Mode, 32 in Half Duplex
Data Type Supported: 100 Integers or 100 Binaries, or 50 floats, 82 character string per scan line
Scan lines: 100 input, 100 output
Physical Connections: RS485 and RS232

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460ETCDFM-N2E
DATASHEET  USERGUIDE
460ETCDFM-N2EW
DATASHEET  USERGUIDE
460ETCDFM-N34
DATASHEET  USERGUIDE
460ETCDFM-N700
DATASHEET  USERGUIDE
460ETCDFM-NNA1
DATASHEET  USERGUIDE