Connect Modbus RTU Slaves to a DeviceNet Master

Connect up to 32 Modbus RTU slaves to a DeviceNet PLC

SKU: 460MMDS

460MMDS

$NZD 1,434.88 - $NZD 1,487.68

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

Access Up To 32 Modbus RTU Slave Devices as a DeviceNet Slave
The 460MMDS moves registers and coils between up to 32 Modbus RTU Slaves and a DeviceNet Master. It’s the perfect tool to get your Modbus RTU Slave data connected to your DeviceNet Master.

Best of all the product is Made in the USA, is always in stock and comes with a 5 year warranty.

How Do I Use the 460MMDS in My Application?
For Most applications the mapping is very straight forward. Modbus register and coil data is mapped to data groups in the DeviceNet Master. DeviceNet data is mapped directly to your Modbus RTU Slaves. Up to 240 bytes of data can be mapped in each direction. Once you manually map the register tables for the Modbus RTU slaves the data will be automatically mapped to DeviceNet.

It really is that simple.

Move Your Data Bi-directionally
You can both send data to your Modbus RTU Slave devices from a BACnet/IP Client and receive data from your RTU Slaves using Analog and Binary Properties. A Total of 150 Analog Input Properties, 150 Analog Output Properties, 1600 Binary Inputs and 1600 Binary Outputs can be connected to up to 31 Modbus RTU Slave devices.

Why Use Real Time Automation as a Gateway Supplier?
The 460MMDS provides an option to access Modbus RTU Slave data on your DeviceNet Master. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because that means you mean a lot more to us.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Modbus RTU Master Features

Modbus Operation Modes: Modbus RTU Master
Function Codes Supported: 1, 2, 3, 4, 5, 6, 15 & 16
Swapping: Byte and Word Swapping
Maximum Modbus RTU Slave Devices: 32
Number Read/Write Scan Lines per RTU Slave Device: 200 Total - 100 reads & 100 writes
Scan Line Support: Up to 125 Registers or 512 Coils

DeviceNet Slave Features

DeviceNet Operation Modes: DeviceNet Slave
Supported Data Types: Int8, int16, int32, int64, uint8, uint16, uint32, uint61, float, double float, binary8, binary16, binary32
Maximum Connections: 1
Maximum Input Size: 240 Bytes in up to 15 Data Groups
Maximum Output Size: 240 Bytes in up to 15 Data Groups

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460MMDS-N34
DATASHEET  USERGUIDE